MOUNTING TRACKS

The foundation of this system is an anodized aluminum mounting track with a grooved bottom design.

With the mounting tracks installed on your boat, this gives you the ability to change your style or method of fishing by sliding in our different types of Traxstech rod holders or downrigger mounts in the mounting track and tightening the star shaped thumbscrews securely in place. When you are not fishing, slide your equipment out of the mounting track and slide in our starboard insert.

All mounting tracks are 3 1/2" wide and are

available in 6", 12", 18", 24", 36", 48", 60" & 72" inches.

Recommended if you are going to use downriggers or have thin walls on your boat. This added support is usually only needed for the
6", 12" and 18" tracks sizes.

The longer track sizes spread the strength out.

REMOVABLE DOWNRIGGER TROLLING BAR ASSEMBLY

With this bar's Super Duty design and grooved bottom interior you won't have a worry in the world about how secure your equipment is in our system. With these added features we continually strive to bring our fellow fisherman the best equipment available at an affordable price without sacrificing quality.

Generally used for mounting across the transom. This raised bar assembly includes two 6" mounting tracks, two 4 1/2" risers, two 4' sections with connecting plate and two bar end caps.

A trolling bar allows the positioning of downrigger's, rod holders and other accessories the ability to be strategically located across the transom.

(The bar can be cut  to different lengths to allow for a greater flexibility across the transom or along the gunwale to provide a raised working surface. Contact us for more creative ideas.)

This new mounting option allows the Traxstech fishing system to now be used with the boat manufactured gunwale track design.

ADJUSTABLE ROD HOLDER

Our #1 selling rod holder!
(The strongest adjustable rod holder available on the market)

This holder has five locking positions up and down, 45 degrees of side to side rotation, giving you the flexibility to position your rod for many different types of fishing. (Excellent for dipsey diver use)

Base and Tube made of aircraft quality aluminum; working components are made of stainless steel to provide strength and prevent corrosion.

This 10 1/2" rod holder is angled at 70 degrees and has 45 degrees of side-to-side rotation.

This rod holder works well with in-line planer boards, planer mast with large boards and also next to your downrigger. All Aluminum

• 2" dia x 10-1/2" long aluminum tube with cross pin in bottom
• Clamps on 1-1/4" dia thru 2" dia round rails or 1-1/4" thru 1-1/2" square rails
• Available with clamp going in vertical direction (SRH-200V)
• Works great for rod storage or as a net holder

LEXAN ROD HOLDERS

New and Improved, Stronger Reinforced Base!
This tube style rod holder offers the patented squeeze button adjustability! By squeezing the side of the rod holder you can move the tube up or down to a new position with one handed ease of operation. (Excellent for Walleye Fisherman)

• Rubber strap keeps rod secure
• 9 Locking Positions,180 degrees Up & Down
• 45 degrees Side to Side Rotation
• Steel band reinforced base

Available in Black

TREE STYLE

The Traxstech Tree includes:

• 6" mounting track
• 4" tall riser with 18" track
• 3 lexan rod holders
• mounting track end cap (1 set)

The tree base allows 45 degrees of rotation in any of our tracks, you also gain another 45 degrees of rotation with our rod holder bases.

This unit offers great versatility, when changing your style of fishing remove the tree from the 6" track base and allows you to slide a downrigger base or additional component into 6" track.

(Tree style available in 4, 6 & 8" height model with 12" track on top)

The tree is available in 6" and 8" models.

The Traxstech downrigger mount bases allow you to position your downrigger's strategically in our track system. when you change your style of fishing, would like to remove your equipment for pleasure boating or store your equipment for the off season simply loosen the thumbscrews, slide equipment out of the track and your boat has a nice clean look.

The Traxstech downrigger swivel base offers a 3/4" thick aluminum top plate that is pre-drilled and tapped for the mounting of your downrigger. Our 3/8" diameter stainless steel plunger insures positive locking strength in the 12 available positions to swivel every 30 degrees. With the smoothest swivel action, three different heights, and strongest construction available, our downrigger mount offers all aluminum construction and stainless steel components.

(Fits Most popular brands. Examples - Cannon, Fishlander, Big Jon, Scotty, Penn and Walkers)

DOWNRIGGER NON-SWIVEL MOUNT BASE

This is a removable non-swivel base for mounting your downrigger's; allowing you the flexibility and mobility that the Traxstech system offers.

With a 3/4" thick aluminum top plate that is pre drilled and tapped, to mount most downrigger's and swivel bases of other manufacturers directly to. Giving you three height options and a 3/8" thick bottom plate that slides into any track length we offer, gives you the most secure and flexible way to use downrigger's on you boat.

(Fits Most popular brands. Examples - Cannon, Fishlander, Big Jon, Scotty, Penn and Walkers)

GIMBAL MOUNT

Designed to work in conjunction with an existing flush mount; our pre-drilled and tapped Gimbal Mounts allow easy installation of Cannon, Fishlander, Big Jon, Scotty, Penn and Walker downriggers.

Our Traxstech 6" track can also be mounted in two different directions, parallel to the gunwale or parallel to the transom, on the top plate of the gimbal to give a wider range of use.

The uniqueness of adapting fishing equipment to a gimbal mount allows an easy installation. When not in use; it can be removed to return the boat to its original condition.

Please note, boats that are 30 feet and under are factory equipped with flush mounts that use a 30 deg. 1 1/2" dia. x 10 1/2" long tube gimble mount. This is the most popular in sizes on the market today.

GIMBAL WITH TRACK

This unit is designed to slide into a flush mount and allow you to slide any of our rod holders, downrigger mounts or other accessories into this track. The added feature of a track on the gimbal offers an expanded area; this can be used for additional equipment when fishing multiple set ups. The uniqueness of adapting fishing equipment to this gimbal mount allows for quick and easy installation. When not in use; it can be removed to return the boat to its original condition.

Please note, boats that are 30 feet and under are factory equipped with flush mounts that use a 30 deg. 1 1/2" dia. x 10 1/2" long tube gimble mount. This is the most popular in sizes on the market today.

Having trouble with the angle of your gunwale? The adjustable gimble will solve that, the top track rotates every 3 degrees.

RAIL CLAMPS

The Diverse use of our Rail Clamps allows the expansion of your system by moving rod holders forward to a bow rail or up the gunwale on a rail midship.

The removability of this mounting system allows the avid fisherman to return his boat back into a pleasure craft.

In addition to its flexibility, the Rail Clamps can by used in both a horizontal or vertical position.

Need to clamp something on your arch or T-top? This unit clamps on round tubes from 1-1/4" dia thru 2" dia. Single Rod holders can be bolted to top of rail clamp by drilling clearance holes in rod holder thumbscrew holes or we offer mounting tracks with hole pattern to fit on top of rail clamps from 6" to 48" (Multiple clamps will be needed for longer tracks).

SINGLE PLANER MAST

• Our uniquely designed Aluminum mast is 4' tall.
• The T-slot adjustability allows the reel to be positioned from the base up allowing the user maximum effectiveness and ease of use.
• Our redesigned clutch system, utilizing larger stainless steel spring washers and a one handed adjustable tension feature allows you to control the smooth descent and retrieval of the board.
• Easily slides in and out of your base track for traveling and storage.

DUAL REEL ADJUSTABLE PLANER MAST

• Our uniquely designed Aluminum mast adjusts from 4-1/2' to 7-1/2'
• The T-slot adjustability allows the independent reels to be positioned from the base up allowing the user maximum effectiveness and ease of use.
• Our redesigned clutch system, utilizing larger stainless steel spring washers and a one handed adjustable tension feature allows you to control the smooth descent and retrieval of the boards.
• Easily slides in and out of MT-6 base track for traveling and storage.

This unit is supplied complete with:
1 - 6" Backing Plate
1 - 6" Mounting Track (MT-6)
1 - Aluminum Adjustable Mast
2 - Lexan reels with 150' of 200# mono-line & 375# snap-swivel
2 - Lexan Pulleys for the line to roll smoothly

This Lexan reel with an aluminum clamp will fit securely on a round rail. A pulley will allow the line to roll not rub, 150' of 200# high-strength mono-line with 375# snap swivel to attach your planer board.

Our vertical rod storage units offer:

• All aluminum construction.
• They feature Two mounting options:
  • Opt. # 1- Unit can be hard mounted, using holes provided in base plate
  • Opt. #2- An 18" track for RSU-3 or 24" track for RSU-4 can be purchased and mounted first, this will allow the base plate of the vertical rod storage unit to slide into the track and be tightened in place using the thumbscrews provided, this allows for the unit to be easily removed when not in use.
• Each tube has a solid pin in the bottom for the rod butt to set on so there is no damage to your reels
• Units can also be used to hold a net while fishing
• Some examples of places these can be used:
  • side of a hard top
  • front side of engine covers on i/o models
  • front side of passenger console
  • back side of transom on fiberglass boats (usually with outboards)
  • using our rail clamps and track for mounting to a square pontoon boat rail (as pictured)
  • garage wall for safely storing rods & reels in the off season

ROCKET LAUNCHERS

Our Rocket Launchers are easy to mount and gives equipment a secure storage place, also providing a place to keep rods rigged and ready for quick changes. Our 3 & 4 unit rocket launchers are compact units for storing rods & reels on your hard top. These units are used when a hard top has an excessive crown, a light or radar dome in the way permitting you from using one of our longer units the 8, 10 or 12.

All units have:

• All aluminum construction
• Mounting holes provided
• All tubes are angled back 20 degree

MULTIPLE ROD HOLDER ADAPTOR BASE

Traxstech wants to grow with you so if you have rod holders already we can adapt.

If you own Big Jon pedestal mount holders they can now be fastened to our new 3” tall adaptor base that gives you the flexibility to slide them into our tracks for greater positioning, as always our base provides you the 45 degrees of side to side rotation so you can turn the entire set-up and point the rods out and back for better use when running planer boards.

*Fits all brand multiple rod holders with a 4” x 4” base and a mounting hole pattern of 3-1/4” square.
 

PULLEY RETRIEVER KIT

When using a planer board mast system, this pulley slides on to the line allowing for retrieval. This is an ideal safe way to add more clips to the planer board line. Pulleys can also be used on downrigger's for retrieving the cannon ball from water surface to boat. Molded from lexan, with all stainless steel hardware, these pulleys will offer you a lifetime of service.

Includes:

• one pulley
• one cleat
• 15' coil of rope

All of our mounting tracks come with a pre-drilled and tapped hole at each end for use with the pursuit sports end caps. Keeping equipment secure from sliding out, to and from your destination. For locking your equipment into any of our mounting tracks, comes with stainless screws and allen wrench. Purchased as a set.

KEEPER CAP WITH STRAPS - 2pk

Our own design! Made from the most durable material to withstand the elements. These caps fit rod holders using a 2” dia. tube x 1/8” wall.

• They do not come off tube.
• Rod butts don’t wear thru.
• Keeper strap holds rod securely in holder.
• Sold in pairs

BLACK 2" DIA REPLACEMENT CAPS - 2pk

An economy replacement cap to be used on all tube type rod holders that have a 2” dia. tube x 1/8” wall.

• Sold in pairs.

ROD HOLDER ADAPTER PLATE

A-600-6 Adapter Plate - Allows other brand rod holders, such as, Cabela's, and Scotty,deck mounts and Down-East S-17 Salty, to be mounted and used in our track system.

To allow additional flexibility we have added the following mounting patterns:

• Tite-Loc 2" x 2" Mounting Base
• Luhr-Jensen Speed Indicator mounting base
• Vectors Single, Double and Triple rod holders
• Anglers Pal rod holder and multi mount base plate

Adapter plate comes with stainless steel hardware and thumbscrews

Adjustable Position Cleat (CP-04) great for attaching an extra boat fender or dock line.

• 4" or 6" Chrome Plated Zinc Cleat
• 6" Long Aluminum Base
• Slides into any of our Tracks

This bracket was designed to clamp or bolt hand liner reels to, helping protect the boats exterior. River trollers find it easier to fish with the reel hanging securely over the side of the boat, when not using the bracket simply slides out of the track. The bracket has since been used for many other mounting options including downrigger's on small boats, barbeque grills, lanterns, fish finders and aqua views just to name a few.

The bracket measures 3" tall and 12" arm.

New star design allows better finger grip for tightening or loosening, this design also has an opening in the top of the Star for dropping an allen wrench into and tightening directly on the stainless steel screw. Made from super tough nylon with 1/4 - 20 x 3/4" long stainless steel screw. Package quantity of 4

Looking to get your net off the floor? Our Straight Mount Net Holder will do the job, with its all aluminum construction. This net holder offers an impressive 11" of height for securing long nets.

The new and improved Traxstech net holder is welded at the top and bottom of its 1/2" thick x 4 1/2" long base for strength and rigidity.

C-CLAMP MOUNTING BASE

This unit offers many unique features. It can be purchased in three variations and two different heights for maximum flexibility.

• The height of this unit allows for the rod tips to be right next to the boat (in the water) while musky fishing.
• Keeps the rod handle waist height when laid flat out to the side trolling divers, fish disks or flat lining.
• Will keep the butt of the rod closer (out of the way) to your gunwale if pointing the rod tips toward the sky while using with planer boards.
• The oval base provides 45 degrees of side to side rotation
• All aluminum heavy duty construction

Using driftmaster type rod holders. This plate will allow you to mount a threaded 3/8" dia rod or 1/2" dia rod to it and slide into the track to position these rod holders in any location you would like, without drilling each one in a specific location. They can be removed or relocated by tightening the thumb screw.

This compact mounting plate has two hole patterns drilled & tapped to allow your bimini top bracket to be removed from your boat. This allows you to mount a longer piece of track and still use your bimini top, but now the bracket can slide into our track.

* Currently drilled for two of the most popular brackets

This adapter plate features a 1/2" thick x 4-1/2" long aluminum base with two mounting patterns drilled & tapped. One accommodates the Ram® electronics ball mount and the other accepts your adjustable antenna bracket so you can slide your antenna assembly right into our track.

GRILLS

At Traxstech we like to grill what we catch as much as the next angler, with that said we will offer you 3 great grills with many mounting options.

1. Kuuma Grills are made from Stainless Steel.
2. Each grill has a connected lid, removable grate for easy cleaning and drip tray.
3. Runs off one pound propane bottle or you can connect to a larger tank with proper hose.
4. Grill attaches to Traxstech universal bracket facing either direction.
5. Universal bracket allows grill to slide in and out of any Traxstech Track
6. Customer ideas:

• Boats
• Gimbal mounts
• Picnic tables
• Railings
• Porch/Deck
• Pontoon boats
• Sail boats
• Dock
• Even tailgates!!